Challenge coin holder measures: 30" length x 4 1/2" width x 7/8" thick, the coins are also displayed at a slight angle. This coin holder will hold up to 54 standard challenge coins. Grooves measure 1/4" x 1/4" with 3/4" between each groove. The grooves have rubber stoppers at each end to prevent the coins from rolling off. The front has 1 3/8" of space to attach a brass plate.  Each holder is sealed with a highest quality lacquer and has felt pads on the bottom to protect the surface on which it sits. Proudly hand made in USA. Displayed in our Dark Stain.

: Holds up to 54 Standard Challenge Coins, Solid Domestic Cherry, Happily Ship to APO and FPO, Rubber Stoppers on the ends of the Grooves, Poudly Made in the USA
Company: Aaron Reinhart & Sons Woodworking, LLC
List Price:
Amazon Price: $39.99

2 Pack, N95 Respirator Dust Mask.

Health and Beauty: Easy breathability, Soft nose foam for comfort, No tangle straps, N95, Cake resistant media
Company: 3M
List Price: $6.99
Amazon Price: $2.98
Used Price: $1.99

Work Sharp’s WSKTS knife and tool sharpener is specially designed to sharpen any number of knives and tools in your collection. Thanks to its flexible abrasive belts, the WSKTS sharpens knives with straight blades, serrated blades, and any other silhouette or sort of blade. Get quality-grade sharpening functionality in your own shop or job site with the WSKTS’s precision-sharpening guides that consistently hone the correct angle needed.

WSKTS Knife and Tool Sharpener At a Glance: Sharpens any and every knife quickly and efficiently Easily replaceable abrasive grit belts Precision sharpening guides for consistent results Won’t burn or damage blade steel

Work Sharp's WSKTS knife and tool sharpener delivers professional- grade razor-sharp edges on your blades (view larger).

Engineered for Consistent Professional-Grade Results
The WSKTS employs flexible abrasive belts to create a convex edge that is guarantees the sharpest edge for your knives and other tools with blades. Between these belts and the precision sharpening guides, this sharpener promises exceedingly sharp blades with ease, speed, and consistency. It allows tradespeople and hobbyists alike to get professional-grade razor-sharp edges on their own at home, in the workshop, or on the job site.

Sharpening Guides for Accurate Angles
The WSKTS’s precision angle sharpening guides assure that users get the correct angle every time. Included with purchase is a 50-degree angle guide for hunting and outdoor knives (25 degrees per bevel) and a 40-degree angle guide for thinner blades and kitchen knives (20 degrees per bevel). All a user has to do is set the knife in the guide and pull it through for a razor-sharp edge. (The outdoor knife guide also works well for scissor and serrated-blade sharpening.)

Designed for Versatility and Portability
In addition to knives and tools with straight and serrated blades, this sharpener also refines curved knives, tanto blades, filet knives, gut hooks, and more. Garden pruners, lawn mower blades, shovels, and other household and yard tools are also easily sharpened with the WSKTS. It even works as a handheld detail grinder for light-duty grinding and deburring projects. Plus, it can be used with a 12-volt power inverter for use at tailgates, RV sites and camping grounds.

What's in the Box
One Work Sharp WSKTS knife and tool sharpener, two P80 coarse belts, two P220 medium belts, two 6000 fine belts, one 40-degree kitchen knife sharpening guide, one 50-degree outdoor knife guide (including serrated knife guide and scissor guide), a user’s manual, and an instructional DVD.

The WSKTS consistently sharpens a wide range items, from knife blades to shovel edges (click each to enlarge).

Tools & Home Improvement: Sharpen every knife you own like a pro quickly, easily, and with repeatable, consistent results, Comes with premium abrasive belts to meet all your sharpening needs: coarse, medium, and fine, Precision sharpening guides provide fast, easy, repeatable and consistent results, Can also be used to sharpen a wide range of bladed shop tools and lawn and garden tools, 1-year warranty valid for North American 110v power source applications
Company: Work Sharp
List Price: $69.95
Amazon Price: $68.91
Used Price: $61.76

These finger guards are the best insurance against cuts on the fingers from carving with hand tools. They fit well, are very comfortable, and are made of top quality leather. THUMB GUARD SOLD SEPARATELY. Colors may vary.

Misc.: FINGER GUARD ONLY-THUMB GUARD SOLD SEPARATELY
Company: Treeline
List Price:
Amazon Price: $1.50

Fine Indian jewelry will, of course, need to be nestled on equally beautiful cases. A traditional yet always charming way to treasure those jewelry pieces is through jewelry boxes. These wooden Indian jewelry boxes are designed and made by the same hands of highly skilled craftsmen who are constantly acclaimed for their intricate designs and woodwork used for the printing of Indian sarees, which are garments worn around the waist. The process of carving the wooden blocks for the art of the handblock printer is, indeed, a special skill. Most artisans, who design and construct these blocks for printers, are keen carvers as well. They have mastered the art of carving and the use of brass and wood in order to fashion the wooden blocks and to print lines and motifs. There is a small town situated near Delhi, called Pulkhua, which pays tribute to the rich and dynamic culture of its region by using local wood for its products, be it door knobs, wooden blocks, tabletop accessories, lampshades, doorways, and even murals. Not only do these artists carve the wood into intricate and almost lifelike floral patterns, or even edgy geometric designs, but they also chisel finer patterns which are inlaid with some brass wire. They may also inlay the carved wood with bone chips and white metal for a more ethnic look. Therefore, a lot of work goes into these beautiful jewelry boxes. They are to be treasured just as much as the gems and stones they keep.

Jewelry: Jewelry boxes in mango wood. ., Handcarved jewelry boxes, Outer Size: L- 6 inches,W-3.75 inches,H- 2 inches, Inner Size: L-4.25 inches,W-2.3 inches,H-1.5 inches, Created by wood block makers for saree prints
Company: ShalinCraft
List Price:
Amazon Price: $35.91

Y - 4" for Dust Collector * Made with Anti-Static Additive!

Tools & Home Improvement: 4-Inch outside diameter, 9-13/16-Inch width by 4-1/16-Inch height by 8 1/4-Inch diameter
Company: WOODSTOCK
List Price: $6.50
Amazon Price: $4.94
Used Price: $6.98

*WOOD AND HARDWARE NOT INCLUDED* You are purchasing a woodworking paper plan with full scale drawing and instructions to build the project shown in the photo. Your purchase does not include the actual pre-built project. It is not a ready-to-assemble kit. Your purchase does not include any wood or assembly hardware (screws, nails, glue, etc). O Holy Night Christmas Nativity Scene with BONUS 60 Christmas Ornaments and 3D Star! Our full sized pattern set of nativity scene plans includes all of the drawings as pictured. To make it easy to see the patterns on the paper, we have placed a light grey shadow in the patterns. This project is super easy to make. The one tool you need to cut out all of the large pieces is a hand held jig saw (also called a saber saw). Use a good sharp saw blade, preferably ones that can cut tight turns. You can also use a more aggressive (faster cutting) jig saw blade to cut out all of the easier sections, then switch to a smaller blade for the tight spaces. Once you have the pieces cut, simple fit them together in the slots. Stores flat too! 60 Christmas Ornament patterns laid out to make the most of your plywood purchase! We designed the nativity scene so that you can easily put the pieces away with minimal space required for storage. The slots are sized for 5/8 inch thick plywood. You need 2 sheets 48 inches wide and 96 inches long. Since plywood comes in different sizes or maybe your budget will determine what plywood you buy, all you have to do is simply adjust the slot size for the plywood you are purchasing. Finished Dimensions Height: 48 inches for the stable peak, (121.9 cm) Width: 66 inches for the stable only (167.6 cm) Fences are approximately 24 inches tall and 44 inches long Skill Level: Beginner

: This is our product offering of woodworking plans and instructions to build the project shown above., We do not sell the actual pre-built product or kit. We sell plans on how to build the item shown., Our No.05 series woodworking plan is proudly designed and made in the Canada., WOOD AND HARDWARE NOT INCLUDED. Rated for beginner carpenters, woodworkers and craftspeople., Questions? Please email us at sales@woodworkersworkshop.com before you buy. We're here to help!
Company: WoodworkersWorkshop
List Price: $18.95
Amazon Price: $18.95

Tools & Home Improvement: Protects you from hazardous table saw debris, Hood is constructed from one-piece, clear shatterproof plastic, Accepts saw blades up to 16-inch, Connects to standard 4-inch duct system, Adjusts easily to suit thickness of material being cut
Company: PSI Woodworking
List Price:
Amazon Price: $234.19

Working gloves need to be tough and durable, but comfortable to wear and use. Youngstown gloves are made of the highest quality, man made materials to create a glove that is form fit, lightweight, breathable, washable, comfortable and tough. They are designed to be the best working gloves youve ever owned. Carpenter Plus: Cut finger version of the General Utility Plus offering true finger dexterity for screws, nails and other intricate work.

Tools & Home Improvement: Youngstown's Carpenter Plus features a shortened index, middle and thumb for easy handling of small nails, screws and wires., Youngstown style non-slip reinforcement covers the palm, fingers and thumb for enhanced grip, protection and extreme durability, Terry Cloth covers the top of thumb to provide a comfortable and effective way to wipe away sweat and debris from your face and eyes, Comfortable neoprene cuff and closure provides wrist support while locking out dirt and debris, Youngstown's Carpenter Plus glove is a favorite of professional tradesman such as; carpenters, framers, auto-mechanics and electricians
Company: Youngstown Glove
List Price: $21.99
Amazon Price: $15.39
Used Price: $13.85

Uniquely designed to help provide comfortable, reliable worker protection. Ideally suited for work settings that involve heat, humidity or long periods of wear. Workplace applications include grinding, sanding, sweeping, bagging and other dusty/hot operations. Features the 3M Cool Flow Exhalation Valve and adjustable M-noseclip to help provide a custom fit and secure seal.

: Cool FlowValve reduces heat, moisture, and fogging, Protects against certain non-oil-based products, M-shaped nose clip for a comfortable fit, No-tangle straps for ease of use, Allows for easy breathability
Company: 3M
List Price: $18.99
Amazon Price: $11.19
Used Price: $12.63

This kit contains five of Kreg's most popular self-tapping screw sizes for Pocket-Screw Joinery, all in a durable and easy-to-carry case. All Kreg screws feature a deep No. 2 square drive, a needlepoint self-tapping tip, and a hard plastic case built for strength. The kit comes complete with 150 count each of SPS-F1, SPS-C1, SML-F125, and SML-C125 screws as well as 75 count of SML-C250B screws.

Tools & Home Improvement: Contains 675 of 5 most used screws, Includes self-tapping screw sizes for pocket-screw joinery, All Kreg screws feature a deep No. 2 square drive, Includes a durable easy-to-carry case, Includes a a needlepoint self-tapping tip
Company: Kreg
List Price: $29.99
Amazon Price: Too low to display

INCRA Bend Rules make dual-surface layouts a snap using the corner slots shown above.
The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero undertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. 

INCRA Bend Rules also provide zero-parallax measuring on any flat surface.
This is the 12" INCRA Bend Rule. It's also available in 6".

Bend rules are also available in Incra Rule Sets. (IRSET12)

Tools & Home Improvement: Measure on the top, edge and corners simultaneously, Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-inch, Instantly locate a sharp pencil point or scribe where needed, Allows for marking position with zero uncertainty, zero parallax, and zero eye strain, 90 degree shape holds it snugly in place, ultra thin for ultra precision
Company: Incra
List Price: $22.82
Amazon Price: $17.50

High quality tools for the discriminating wood worker. A complete set for virtually every work working requirement--three dimensional carving, deep relief carving, and whittling. Set contains No. 5 knife with No. 24 Deburring Blade, No. 18 Heavy Wood Chiseling Blade, No. 19 Angled Wood Chiseling Blade, No. 22 Large Curved Carving Blade, No. 26 Whittling Blade, and No. 27 Heavy-Duty Saw Blade, five gouges, and four routers boxed in a wooden chest. No. 5175.

Tools & Home Improvement: A complete set for virtually every woodworking requirement, High quality woodworking tools for the hardcore woodworker, Set includes a no. 5 knife handle, 6 assorted blades, 5 gouges and 4 routers, Comes with a wooden chest, 6-1/2-by-3-by-1-Inch at 8-Ounces
Company: Xacto
List Price: $24.56
Amazon Price: $24.56
Used Price: $22.10

16Pc Professional Quality Wood Carving Chisel Set 11- 8.5 in. High Carbon Steel Wood Chisels with High Impact Plastic Handles 3- 6 x 1/2 in. Silicon Carbide Round, 3 Square, Rectangular Stone 6 in. Combination Sharpening Stone Wooden Stricker Heavy Duty Carrying Pouch Included

Misc.: Eleven 9" chisels, hardened high-carbon steel blades with rubberized soft-grip handles, Blade styles include wide & narrow flat, rounded, concave, corner, straight and offset, Dual-grit aluminum oxide whetstone plus round, flat & triangular silicon carbide sharpening stones, Rugged poly-canvas case with elastic pockets to keep organized & protected; 12" hardwood striker
Company: SE
List Price: $40.95
Amazon Price: $29.95
Used Price: $25.87

A high carbon steel 12 piece Carving Chisel Set from TD Industrial. This high carbon steel woodworking carving chisel set is for use with a wooden mallet. Works great for wood, wax and clay. This set features: 1/2" Gouge, 3/8" Parting Tool, 5/8" Gouge, 1/4"-Double Face Skew, 1/4" Spoon Chisel, 1/4" Round Point, 1/4" Skew, 1/4" Spear Point, 1/4"-Hollow Point, 1/4" Straight Chisel, 1/2" Straight Chisel, Chisel size: 8 1/2", Includes custom wood storage case.

Misc.: 12 Piece Set, High Carbon Steel Construction, For Use with Wooden Mallet, Great for Wax and Clay, Wood Case
Company: TJL Industrial
List Price: $61.99
Amazon Price: $30.99

The Corner Pressure Clamp applies pressure on the sides of your stock keeping the two corners together. Will accept any bar up to 1/4" thick.

Misc.: Applies pressure on the sides of your stock, Keeps the two corners together, Will accept any clamp bar up to 1/4" thick, Bar NOT INCLUDED
Company: Peachtree Woodworking
List Price: $9.99
Amazon Price: $6.99

These bevel-edged chisels are hardened and tempered under controlled conditions and accurately ground for precise control. Handle is square with rounded corners for comfort and to prevent rolling. Chisel handles are made of indestructible polypropylene to withstand heavy mallet and hammer blows. Overall lengths 9-3/4"-11", blade lengths 3-1/2" to 4-1/4". These tools are factory ground and require honing before use. Boxed 6-piece set includes 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" widths.

Tools & Home Improvement: Long blade and polypropylene handle for increased leverage, Best suited for hand or mallet work, High carbon solid-forged steel blade for maximum edge retention, Contains 1/4-Inch, 3/8-Inch, 1/2-Inch, 3/4-Inch, 1-Inch, and 1 1/4-inch in box
Company: IRWIN
List Price: $94.42
Amazon Price: $57.91
Used Price: $52.12

Tools & Home Improvement: Make exact copies of any shape, Large 8-Inch arm, Reach the center of a 16-Inch wide piece
Company: MLCS
List Price: $89.95
Amazon Price: $50.51

Add one or two fences to any of your PRO-GRIP clamps and you have a short or long fence where you need it. Great on a bandsaw, router table or drill press. T-slots running the length on the back and front allows for fastening feather boards, false fence boards and stop blocks.

Misc.: Fence is 3 1/2" H x 18" L, Add one or two fences to any PRO-GRIP clamps for a short or long fence, Use on bandsaw, router table or drill press, T-slots run the length on the back and front of the fence, Fasten feather boards, false fence boards & stop blocks -Drill PRESS & CLAMP SOLD SEPARATELY
Company: PEACHTREE WOODWORKING
List Price: $32.99
Amazon Price: $24.99

The MLCS 8377 router bit set is a perfect, economical, all-purpose starter set for your woodworking hobby. It has quality, carbide-tipped bits with 1/2-inch shanks and comes with a wood storage box.

Tools & Home Improvement: Quality, carbide-tipped bits, 15 different bits in set, Wood storage box Included, 1/2-inch shanks, Economical, all-purpose starter set
Company: MLCS
List Price: $69.95
Amazon Price: $39.95
Used Price: $31.99

Our flexible curve rulers are adjustable to hold shape and give precise measurements on curved edges. Raised edge lets you draw a line. Calibrated in 1/16-Inch measurements on one side and 1mm increments on the other side. Made of plastic. 36-Inch long.Make smooth curvesHold shapePrecise measurementsGreat for woodworking or craft project

Tools & Home Improvement: Make smooth curves, Hold shape, Precise measurements, Great for woodworking or craft project
Company: MLCS
List Price: $29.99
Amazon Price: $12.60
Used Price: $10.12

Bench Dog Bench Cookie work grippers are versatile, non-slip bench pads that lift, grip, and protect your work. With their high-friction rubber surfaces and durable cores, they prevent projects from slipping as you plane, sand, carve, assemble, and more. They can also elevate your work, providing clearance for routing or finishing jobs. Available in packs of four, these convenient accessories are a must-have addition to any workshop.

Bench Cookies At a Glance: Bristly, rubber-padded surfaces ensures that projects won't slip Provide a level surface for planing, sanding, assembly, and more Raise the workpiece for extra clearance, making edge routing and finishing easy Durably designed for long-term use Non-marring design protects the surface of the project

Use the bench cookies to secure a workpiece in place. View larger.

Rout edges and get plenty of clearance. View larger.

Non-Marring Rubber Surface Securely Holds Workpieces
Each Bench Dog Bench Cookie is coated with a non-marring, bristly rubber pad. Similar to the material found on most router mats, these high-friction pads help grip projects firmly in place. For example, if you are planing a piece of wood, you can use Bench Cookies to create a balanced surface that won't slip.

These Bench Cookies have such a strong grip, in fact, they will securely hold a workpiece when you're sanding with a 60-grip belt. And because of their non-marring design, Bench Dog Bench Cookies won't leave behind unsightly marks like clamps often do.

Pads Provide Clearance for Routing and Finishing
In addition to holding your workpieces in place, Bench Cookies also work to elevate your projects. Measuring three inches in diameter and one inch in height, they give you extra vertical clearance and take up minimal surface area. They provide a hassle-free alternative to clamping and allow you to rout the edges of a workpiece with plenty of clearance to spare.

They also make finishing a piece much easier, as you are able to freely brush and varnish the edges of your wood without obstruction. For the best results, always use four bench cookies to elevate or stabilize your project.

About Bench Dog
Bench Dog began in 1995 with the simple concept that great tools are the result of smart design and solid engineering. Since then, Bench Dog has steadily grown, thanks to the recognition and enthusiasm of customers, trade publications, and the woodworking community at large.

Bench Dog offers a growing line of router tables, safety accessories, and tools for builders and do-it-yourselfers. Bench Dog products are used by woodworking professionals, intermediate hobbyists, schools, and serious beginners who are looking for tools of uncompromising quality and value.

What's in the Box
Four bench cookies.

Freely brush and varnish the edges of your workpiece without obstruction.

Tools & Home Improvement: Rout, sand, cut and carve without using clamps, Raise up workpieces for easy edge finishing, Support projects without leaving marks, Assemble projects on a stable, non-slip base
Company: Bench Dog
List Price: $18.94
Amazon Price: $10.49
Used Price: $10.26

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

Jig Master System At a Glance: Removable drill guide for use with benchtop and portable bases 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick Rear-mounted clamp design--rigidity and strength to keep workpiece in place Comes with portable base, SkillBuilder DVD, carrying case, and more Hardened steel guides with lifetime warranty

Sturdy benchtop jig utilizing the benchtop base for high-speed production Pocket-Holes.

Contractor-grade jig for work on the road with the portable base.

Three Tools in One
Thanks to its innovative Removable Drill Guide, the Kreg Jig Master System can be many tools at once. First, a sturdy benchtop jig utilizing the benchtop base for high-speed production pocket-holes, second as a contractor-grade jig for work on the road through use of the portable base, and finally as a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide.

Serious Woodworking Tool with High-Quality Features
Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable three-hole drill guide, and seemingly endless adjustability, this jig has it all. If you're serious about owning the highest quality tools, look no further than the Kreg Jig Master System.

Sturdy Toggle-Clamp
The Kreg Jig Master System features the same reliable rear-mounted clamp design featured on the very first Kreg jig. It's a proven design offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting.

In addition, the large clamping recess makes it easy to secure the jig to the workbench using Kreg's multi-purpose face clamps or any common bar clamp or c-clamp.

Removable 3-hole drill guide.

Three-Hole Drill Guide with Steel Core
The patented three-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses. Every Kreg drill guide features a hardened steel core that carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

Durable Construction and Optimized Drilling Angle
The blue body of the every Kreg jig is made from a heavy-duty glass-reinforced nylon, a unique composite material that offers the resiliency and flexibility you need without sacrificing strength and durability. To increase driving efficiency and minimize the overall size of the pocket-hole to less than 1-1/2 inches, this system also features an optimized drilling angle.

Wood-Chip Relief Hole Extends Bit Life
The Kreg Jig Master System includes one wood-chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket-hole in one plunge instead of three.

What's in the Box
Kreg Jig Master System, face clamp, portable base, drill guide spacer, material support stop, dust collection attachment, 3/8-inch stepped drill bit, six-inch square driver, three-inch square driver, starter screw set, starter plug set, quick-start guide, SkillBuilder DVD, and carrying case.

Tools & Home Improvement: Removable drill guide for use with bench top and portable bases, Patented 3-hole drill guide allows you to make perfectly placed pocket-holes in a wide variety of material widths and thicknesses, 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick, Dust collection shroud helps reduce wood chips, Large clamping recess allows for many different styles of clamps to secure the jig to the workbench
Company: Kreg
List Price: $149.99
Amazon Price: $139.00

Tools & Home Improvement: Make exact copies of any shape, Large 8-Inch arm, Reach the center of a 16-Inch wide piece
Company: MLCS
List Price: $89.95
Amazon Price: $50.51

High quality tools for the discriminating wood worker. A complete set for virtually every work working requirement--three dimensional carving, deep relief carving, and whittling. Set contains No. 5 knife with No. 24 Deburring Blade, No. 18 Heavy Wood Chiseling Blade, No. 19 Angled Wood Chiseling Blade, No. 22 Large Curved Carving Blade, No. 26 Whittling Blade, and No. 27 Heavy-Duty Saw Blade, five gouges, and four routers boxed in a wooden chest. No. 5175.

Tools & Home Improvement: A complete set for virtually every woodworking requirement, High quality woodworking tools for the hardcore woodworker, Set includes a no. 5 knife handle, 6 assorted blades, 5 gouges and 4 routers, Comes with a wooden chest, 6-1/2-by-3-by-1-Inch at 8-Ounces
Company: Xacto
List Price: $24.56
Amazon Price: $24.56
Used Price: $22.10

A high carbon steel 12 piece Carving Chisel Set from TD Industrial. This high carbon steel woodworking carving chisel set is for use with a wooden mallet. Works great for wood, wax and clay. This set features: 1/2" Gouge, 3/8" Parting Tool, 5/8" Gouge, 1/4"-Double Face Skew, 1/4" Spoon Chisel, 1/4" Round Point, 1/4" Skew, 1/4" Spear Point, 1/4"-Hollow Point, 1/4" Straight Chisel, 1/2" Straight Chisel, Chisel size: 8 1/2", Includes custom wood storage case.

Misc.: 12 Piece Set, High Carbon Steel Construction, For Use with Wooden Mallet, Great for Wax and Clay, Wood Case
Company: TJL Industrial
List Price: $61.99
Amazon Price: $30.99

INCRA Bend Rules make dual-surface layouts a snap using the corner slots shown above.
The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero undertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. 

INCRA Bend Rules also provide zero-parallax measuring on any flat surface.
This is the 12" INCRA Bend Rule. It's also available in 6".

Bend rules are also available in Incra Rule Sets. (IRSET12)

Tools & Home Improvement: Measure on the top, edge and corners simultaneously, Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-inch, Instantly locate a sharp pencil point or scribe where needed, Allows for marking position with zero uncertainty, zero parallax, and zero eye strain, 90 degree shape holds it snugly in place, ultra thin for ultra precision
Company: Incra
List Price: $22.82
Amazon Price: $17.50

Duckwear Super Bib Apron has large bellow pleated pockets, designed to hold 5 pounds of fasteners and a chest pocket for pencils or rules. Adjustable at the waist and neck. Overall size 23-3/4" x 23-3/4".

Tools & Home Improvement: Multi-pocket tool bib with integrated pockets for just about everything, 5 pockets to hold larger tools and 8 narrow pockets for marking devices and small tools, 100-percent cotton duck construction, Quick-release buckle; 3-compartment chest pocket, Weighs 12.8-ounces shipped
Company: Bucket Boss
List Price: $24.04
Amazon Price: $15.79
Used Price: $16.00

Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule. Think of it as a combination square for marking or measuring thats simultaneously set to every scale position with perfect, instant accuracy. There are micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position to instantly locate your sharp pencil or scribe exactly on target with zero uncertainty. The Incra T-Rule makes it very easy to draw exact lines in either direction, and with zero uncertainty and no eye strain. Other features include 0- to 3-inch height markings on the end in 32nds, and the option of marking holes every 1/100-inch.

Tools & Home Improvement: Precise, versatile and easy-to-use T-Rule, Combination square for marking with perfect, instant accuracy, Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position, Locate your sharp pencil or scribe with absolute precision, Limited 1-year warranty
Company: Incra
List Price: $34.95
Amazon Price: $19.99
Used Price: $21.12

Turn fine details on larger turning or turn tiny intricate projects with this terrific micro set.Includes: 1/8-Inch spindle gouge, 9/64-Inch square nose scraper, 1/8-Inch round nose scraper, 3/16-Inch spindle gouge, 1/8-Inch parting tool, 3/8-Inch by 1/8-Inch skew chisel, 9/34-Inch beading tool2-1/2-Inch blades with 5-1/4-Inch handlesThe M2 High Speed Steel blades outlasts high carbon steel 6 to 1, and will give you years of use.Finished hardwood handles with brass ferrulesPackaged in an attractive walnut stained wood case

Tools & Home Improvement: Includes: 1/8-Inch spindle gouge, 9/64-Inch square nose scraper, 1/8-Inch round nose scraper, 3/16-Inch spindle gouge, 1/8-Inch parting tool, 3/8-Inch by 1/8-Inch skew chisel, 9/34-Inch beading tool, 2-1/2-Inch blades with 5-1/4-Inch handles, The M2 High Speed Steel blades outlasts high carbon steel 6 to 1, and will give you years of use., Finished hardwood handles with brass ferrules, Packaged in an attractive walnut stained wood case
Company: PSI Woodworking
List Price: $49.95
Amazon Price: $38.72