Test continuity and locate signal of installed wire and cable . Generator stores in base of probe . 2 selectable tone styles . Includes RJ11 alligator clip assembly and RJ11 patch cord. Meters & Testers: Custom Installation: Tools...

Electronics: CD-ROMTest continuity and locate signal of installed wire and cable, Generator stores in base of probe, 2 selectable tone styles, Includes RJ11 alligator clip assembly and RJ11 patch cord
Company: Ideal
List Price: $40.99
Amazon Price: $23.69

With a narrow chimney and wide base, the Ravenscroft Crystal Amplifier Cabernet glass will magnify, focus and intensify the bouquet of your favorite cabernet. Hand made in Europe from the finest brilliant lead-free crystal, these glasses have a lighter, more elegant hand feel than any machine made glass of similar design. You will describe the amplification effect of this glass as exciting and racy. The wide bowl and deep chimney of the Ravenscroft Crystal Amplifier Cabernet glass will buffer the high alcohol attack of big, young new world reds while beautifully showcasing their intense fruit. Height 10-inch Capacity 28-Ounce Recommended for: Bordeaux, Cabernet Franc, Cabernet Sauvignon, Merlot, Sangiovese, Syrah and Tempranillo

Kitchen: Four wine glasses, Lead-free Crystal, Giftboxed, Hand wash recommended
Company: Ravenscroft Crystal
List Price: $100.00
Amazon Price: $89.99

RGB LED PWM control Signal Amplifier – Used to extend the range and synchronize multiple LED strip to a single LED Controller, i.e. EV-RGBCTRL-4A Receives PWM signals from the EV-RGBCTRL-4A, and synchronizes and amplifies. Many EV-RGBAMP-4A may be connected to a single EV-RGBCTRL-4A Used to amplify any 12V or 24V LED PWM signal up to 4A per ch (3 channels) 12V DC (or 24V) driver required to power this amplifier, dependant on LED strip wattage Max power Controlled 144W @ 12V (CMOS open drain, Common Anode) Dimensions: 3.78”L x 1.77”W x 0.71”H (96L x 45W x 18H mm) Static Power consumption:

* 1500W x 2 Output at 2 Ohms * 3000W x 1 Bridged Output at 4 Ohms * 2 Ohm Stable * MOSFET Power Supply * High/Low/Full Crossover Switch * Variable Hi-Pass:40 Hz-250 Hz * Variable Low-Pass : 40 Hz-250 Hz * Variable Input Level (Gain) Control : 6V-200mV * Variable Bass Boost:0~+18dB * Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave * Sub Sonic Switch * Thermal / Overload / Short Circuit Protection * Soft Turn On/Off * Power & Protection LED Indicator * Low Level RCA Input : 10K Ohms * Line Level RCA Output * Frequency Response : 15 Hz-30K Hz * Signal to Noise Ratio: >95dB * THD:0.1 % * 2x50 Amp Maxi Type Fuse * Slim Size Amplifier Design For Easy Installation * Dimensions: 10.63"W x1.75"H x 15"L

: VCT2310
Company: LANZAR
List Price:
Amazon Price: $132.78

Great for Lecture halls, Movies, Shows, or Church. Turn up the volume on what people around you are saying. Listen at a level you want without disturbing others. Hear a pindrop from across the room. Turns ordinary hearing into extraordinary hearing

: Great for Lecture halls, Movies, Shows, or Church, Turn up the volume on what people around you are saying, Listen at a level you want without disturbing others, Hear a pindrop from across the room, Turns ordinary hearing into extraordinary hearing
Company: Ideavillage Product Corp
List Price:
Amazon Price: $2.49

Clarity portable high-frequency amplifier makes words clearer, not just louder. Amplifies incoming calls more than 3 times above normal level with fingertip control, compatible with any modular standard or electronic phone, single or multi-line (except trim-style phones with the dial keys in the handset.) Connects between the handset and the telephone.

Electronics: Clarity Power technology; Easy-to-use features, Amplifies incoming sounds up to 25 decibels, Battery powered; Simple, easy-to-use design, Compact, portable design in great for home use, office use or travel, 1 year Manufacturers Warranty
Company: Custom Phones - Fun Home Products
List Price: $29.99
Amazon Price: $19.95

Controller: Input Voltage: 12V Output Voltage: 12V 2A each color max Wall mount power supply: Input Voltage: 100V-240V ~50/60Hz Output Voltage: 12V 4A Operating Temperature: -20~60 ? Item included: 5m 150pcs. 5050 SMD RGB LED Strip x 1 AC power supply unit x 1 (Standard US Plug) LED IR Controller set x 1

Electronics: Complete RGB Kit including 12 Volt 4 Amp Power supply, CE Controller, and 16.4 Ft RGB Strip, One end of strip can plug into controller with 4 male pins, Other end of strip has 4 wires to allow you to connect to Data Repeater, Connectable and linkable to many strips (data repeater not included), 3m Tape on the back of LED strip
Company: LEDwholesalers
List Price:
Amazon Price: $31.00
Used Price: $37.00

The LED RGB Amplifier are required it if the load of the RGB ribbon or strips exceeds the rated output of the controller or decoder you will useThe RGB LED amplifier copies and extends the commands of your LED master controller. It is essential when lighting large areas or long projects/spaces, such as a lengthy, expansive bar. In a darkened room, your eyes are naturally drawn to the well-lit counter and shelves of liquor. In the right settings, LED lighting can impress so much more than a vase of flowers or attractive furnishings.Although the RGB LED amplifier is often used for commercial reasons, its compact design makes it just as easy to apply in small homes. At only 4 ounces, it's also small and light enough to store nearly anywhere.- Input: RGB- Ouput Common Anode: RGB- Output Current: 4A (each channel)- Supply Voltage: DC 5V, 12V, 18V or 24V- 12 Volt DC input is required- Size: 4.49 x 2.56 x 0.98 inches- Gross Weight: 1 lbs

:
Company: Optima Lighting
List Price:
Amazon Price: $19.95

An RGB Led amplifier is necessary for every additional 5-10 meters of RGB Led strip flexible lighting. The RGB Amplifier is used to increase load capability for the wireless RGB Controller, and to avoid color difference between the start and end of strip Caution: 1. There is 2 ways to input the power to the amplifier: a, With 5.5x2.1mm DC plug 12V power supply; b, with bare wire 12V power supply You can only chose one type of power input, not both in the same time. 2. 2. Not suitable for Common Cathod type RGB LED Strips. 3. Not suitable for Chasing type LED RGB strips.

: Input Voltage: 12V DC, Input Current: 20A max, Output Voltage: 12VDc, Output Current: 0~6.7A each channel, Working temperature: -20 ~ 60C
Company: TorchStar
List Price: $29.89
Amazon Price: $20.99

This product is to increase the volume of telephone ring in noisy places; To help the hearing-impaired to recognise ring coming; The lamp flasher is offered to avoid the ring noise in a quiet environment: Note: it only fit for RJ11 telephone, if yours are not, please buy another converter, but here is not included.

Electronics: Material: Plastic, Color: White, Flasher Color: Red, Size: 3" x 2" x 1" (L*W*D), Package Contents: 1 x RJ11 Telephone Ringer
Company: uxcell
List Price:
Amazon Price: $5.25

When power isn’t enough, you need Pyle Power. This two-channel, 200-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Electronics: Maximum Power Output 2 x 1000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB, Bridgeable RMS Power @ 4 Ohms: 1x2000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection -, 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms, Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off, Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry, Dimensions:10.24" W x 2.21" H x 11.02" L
Company: Sound Around
List Price: $168.99
Amazon Price: Too low to display

This 300 W mini-amplifier is a powerful solution for your trade show display. It easily allows you to pipe music to two speakers using a 3.5mm jack input -- so you can hook it up to your iPod, laptop, or any other digital music player. It's portable, mountable, and easy to conceal. Requires 12 V DC.

Electronics: 2 Channel IC Mini Amplifier with 3.5mm Input Plug2 x 15 Watts RMS @ 4 Ohms/ 2 x 150 Watts Peak - T.H.D. 1% - Size: 3.94''L x 2.99''W x 1.4''H, 3 way Selectable Electronic Crossover Network - 4 Ohm Stereo Stable, Adjustable Gain Control - Anti-Thump Turn On, 3.5mm / 1/8" Stereo Audio Inputs - Soft Turn On/Off, Power Protection Circuitry - Dc: 12-14.8 Volt
Company: Pyle
List Price: $51.99
Amazon Price: Too low to display
Used Price: $19.20

Your first view of the RIOT Series may deceive you. The elegant lines are a textbook exercise in minimalist design. From this point on, however, its power and reproductive authenticities will be anything but minimal. Perhaps the only thing more extensive than the features showcased is the enjoyment you'll derive from them. This is only one reason BOSS Audio has led the way in 12 Volt Entertainment for almost a quarter of a Century.

Electronics: MOSFET Monoblock Power Amplifier, Remote Subwoofer Level Control Included, Blue Illuminated BOSS Logo, 1000W x 1 Max Power, 250W x 1 RMS Power
Company: BOSS AUDIO
List Price: $133.00
Amazon Price: Too low to display

8 Gauge amplifier installation kit includes:

Electronics: 8 gauge amplifier installation kit, Competition high-quality fuse holder, Ring terminals: #10, 0.25-inch, 0.31-inch, Twenty 4-inch wire ties, Many feet of wire and cable: red power, black ground, blue turn-on, speaker wire, 20 Ft. 8 ga red power cable Competition high-quality fuse folder 3 Ft, 8 ga. black ground cable 16 Ft. 18 ga blue turn-on wire 20 Ft, high performance RCA (TRCA) interconnect 30 Ft. speaker wire 6 Ft. split loom tubing
Company: Boss Audio
List Price: $28.00
Amazon Price: Too low to display
Used Price: $7.95

The KAC-8105D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power, the KAC-8105D includes a built-in infrasonic filter.

Electronics: Class D Mono Car Audio Amplifier, 1000W Max Power, 300 X 1 @ 4_, 500 X 1 @ 2_, Thermal Management System, Speaker-level inputs with signal sensing turn-on, Bass Boost Control, Variable low-pass filter, High quality speaker level input and blue illumination, Preamp-level inputs and outputs
Company: KENWOOD
List Price: $250.00
Amazon Price: Too low to display

Your first view of the RIOT Series may deceive you. The elegant lines are a textbook exercise in minimalist design. From this point on, however, its power and reproductive authenticities will be anything but minimal. Perhaps the only thing more extensive than the features showcased is the enjoyment you'll derive from them. This is only one reason BOSS Audio has led the way in 12 Volt Entertainment for almost a quarter of a Century.

Electronics: 2-Channel MOSFET Power Amplifier, Remote Subwoofer Level Control Included, 100W x 2 Max Power, 100W x 2 RMS Power, 50W x 2 Max Bridged Power
Company: BOSS AUDIO
List Price: $56.00
Amazon Price: Too low to display

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Electronics: 1000 Watts Total System Power Output, MOSFET Pulse Width Modulated Power Supply, Built-In Variable Low/High/Subwoofer Crossover, High/Low Level Input, 2 Ohm Stereo Stable
Company: Sound Around
List Price: $135.99
Amazon Price: Too low to display
Used Price: $45.54

If you're looking for both quality and power, this dynamic 2000-watt, 4-channel MOSFET amplifier is it. Versatile and powerful, this high-performance amp provides depth and feeling to your music. You'll be amazed at the clarity and richness of the bass this amp produces with its state-of-the-art bass boost circuit. Perfect for competitions, this affordable and durable amp provides a rich sound at all volumes, and is easy to configure yourself. The HTG447 is equipped with safety and security features, including LED indicators and advanced protection circuitry. Blow the competitors away with an elite amplifier that's one of Lanzar's top-sellers - and for good reason. The MOSFET pulse width modulation power supply pumps a clean, distortion-free signal to your speakers The unit also includes a bass-boost remote, low- and high-pass filters, and tons of other great features. This amp is made to last, and once you upgrade your system with a Lanzar amplifier, you'll wonder how you ever lived with low-resolution sound before.

Electronics: 4 x 250W RMS @ 4 OHMS - Bass Boost Circuit - Low Pass Filter Controls - S/N Ratio: >90dB - Subwoofer Remote Level Control, 4 x 500W Max @ 4 OHMS - Bridgeable at 4 Ohms - High Pass Filter Controls - Channel Separation: >65dB - Fuse: 20A x 2, 2 x 1000W Max @ 4 OHMS Bridged - 2 Ohm Stereo Stable - Power and Protection LED Indicators - Freq. Response: 10Hz-45KHz - Dimensions: 14.96''(L) x 2.24''(H) x 8.81''(W), 4 x 350W RMS @ 2 OHMS - Gold RCA Inputs - Soft Turn-on/Turn-off - HPF Freq. Response: 80KHz, Electronic Crossover Network - Line Outs for Left and Right Channel - THD:

The Pyle Chopper series has been specially designed from the bottom up to provide quality sound in a sturdy form factor. You’ll be blasting your tunes and rocking the block with these amps. The PLA2200 is a two-channel, 1400-watt bridgeable power amplifier. It’s equipped with everything you’ve come to expect from quality car amplifiers – switchable bass boost, variable gain control, and a configurable electronic crossover network. The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. And this amp’s slim size makes installation a breeze – you’ll have no trouble finding a spot for this powerful little device. So chop up your tunes and play them for the world with the Pyle Chopper.

Electronics: CD-ROM700 Watts x 2 Output Slim Size Amplifier Design For Easy Installation, Variable Hi/Lo Electronic Crossover Network, Gold Plated RCA Inputs Outputs, Power And Protection LED Indicators, 1400 watts x 1 Bridged Output
Company: Pyle
List Price: $175.99
Amazon Price: Too low to display
Used Price: $50.00

1600 watt arctic amplifier.

Electronics: Bridgeable, 2-Channel, Mosfet Pwm Power Supply, 1600W Max, 4? Rms: 75W X 2, S/N Ratio: 90 Db
Company: Sound Around
List Price: $162.99
Amazon Price: Too low to display
Used Price: $48.63